Case Study Overview

Site Residential property
Location Wales
Repair Type Wood repair
Defect Heavy rotting in an oak beam

Repair Products

Sylmasta AB Original Epoxy Putty

Case Study PDF

Case Study Details

A property owner in Wales was renovating a house they had inherited, including improving its exterior appearance. The facade consisted of an untidy mix of concrete breeze blocks, painted brick and a large oak beam.

The intention was to render the entire wall with cement. Doing so required a flat, sound surface for the cement to be applied to. Unfortunately, the ancient oak was badly rotted in places with large voids which made it impossible to render successfully.

To overcome the problem, the property owner decided to repair the rotted wooden beam using Sylmasta AB Original Epoxy Putty. AB Original was chosen for its super strength, ease of application and two-hour work time, meaning more of the putty could be mixed in one go and carefully applied without needing to rush through fear of premature curing.

30kg of AB Original were delivered to the site. The putty was supplied in 200g sticks, whereby the resin and hardener are pre-measured. This eliminated the need to measure out separate components of Part A and Part B, making application quicker and more straightforward.

Each stick was kneaded by hand until it turned a uniform white colour. Whilst soft, AB Original was pushed into the voids left where the oak had rotted away, easily bonding to the damaged wood. The homeowner was particularly attracted to AB Original because no tools or equipment were needed for the repair.

Where the gaps left by rot were particularly big, the homeowner added hardwood inserts on top of the putty to reduce the amount of AB Original required.

These inserts were pressed directly into the putty whilst it remained soft. A permanent bond was created between the putty and the hardwood once AB Original had cured to its final rock-hard, watertight material.

For the AB Original which remained exposed, a little water was used to create an ultra-smooth finish as the putty set. The cured material itself could be rendered onto directly, helping to make adding the cement coating a straightforward task.

Products Used

AB Original Epoxy Putty Stick
Epoxy putty with a two-hour work time which repairs damage in wood caused by rotting

Related Case Studies

Case Study: Pipe Joints Sealed in Cast Iron Rainwater Stack Repair at London Office Block

300 pipe joints in a 250-metre-long internal cast iron rainwater stack suffering with corrosion are sealed, avoiding a total system replacement during the refurbishment of an office block

Case Study: Underground 600mm Concrete Water Main Pipe Break Repair in Canada

A city authority in Canada repair a break in an underground 600mm diameter concrete pipe at the exact point it passed through a wall, significantly reducing levels of water loss

Case Study: Seawater Storage Tank Floor Repair at Gas Processing Plant in Saudi Arabia

Gaps which had developed between rubber sheets covering the floor of a seawater storage tank at a gas plant are filled in to protect the exposed concrete coating the bottom of the tank

Case Study: Environment Agency Repair Crack in Underwater Wall Between River & Trout Farm

The Environment Agency permanently seal a 700mm long crack in an underwater wall discovered when abnormal levels of water were monitored passing from a river into a trout farm

Case Study: Fence Spurs Suffering from Concrete Cancer Filler Repair Using Epoxy Putty

Spurs suffering from concrete cancer which began disintegrating during the replacement of a trellis fence are repaired and rebuilt using Sylmasta AB Original Epoxy Putty

Case Study: Repair of Leaking 350mm Effluent Pipe Running out to Sea Underneath Salt Marshes

An effluent pipe running under salt marshes and out to sea is sealed in a logistically challenging repair which had to be completed in an eight hour window whilst the tide was out

Case Study: Reinforcement of Heavily Corroded Steel Pipe to Avoid Future Leak Repair

A heavily corroded section of steel pipe is reinforced, helping a site to avoid a future breach which would have required a costly and disruptive leak repair or replacement of the line

Case Study: Oil Refinery Repair of a Leaking Underground GRP Seawater Return Pipe

A leaking underground 3000mm GRP seawater return line is partially excavated and sealed in an epoxy putty repair at an oil refinery, cutting downtime from several weeks to two days