Sylmasta AB Original Epoxy Putty Stick
AB Original Epoxy Putty Stick supplies Sylmasta’s super-strength universal repair putty in a combined pre-measured stick format rather than separate resin and hardener. With no need to measure out Part A and Part B components before mixing, AB Original Stick makes repairs quicker and easier.
Each Stick is 200g and contains resin on the outside and hardener in the middle. The user simply cuts off the required amount of putty from the Stick and kneads by hand before applying to the substrate being repaired or bonded.
AB Original is ceramic-filled, making it harder wearing and stronger than other epoxy putties. It has a working time of up to two hours, allowing for more of the material to be mixed, shaped and formed as needed before curing begins.
It bonds to metal, wood, brick, masonry, concrete, porcelain, ceramics, clay and most plastics. AB Original cures underwater and adheres well to wet surfaces. It is suitable in interior or exterior settings. Once cured, it can be tapped, drilled, screwed, sawed, machined, ground, filed, or painted.
As part of the Sylmasta Pipe Refurbishment System, AB Original seals holes and cracks in pipes of almost all substrates. When applied to damaged or weakened areas, it restores the surface profile of pipelines by rebuilding wall thickness.
Away from pipe repair, AB Original acts as a damage filler, insulates electrical components, can be used to make prototypes and offers high-strength bonding between different materials.
Sylmasta AB Original Epoxy Putty Stick Details
Three colours of AB Original Stick are currently available – white, black and grey. If you require a different or specific colour for applications such as brick or wood repair, please contact Sylmasta for information on customised AB Original.
To use an AB Original Stick, the amount of epoxy putty required is cut from the stick and kneaded by hand until it turns a uniform colour with no streaks.
Whilst soft, the putty is pushed into holes and cracks in pipes, metalwork and other materials where it will cure, sealing and filling areas of damage. For bonding, you apply the putty and use it to attach the pieces requiring repair together.
The hand-kneadable consistency of AB Original eliminates drips and runs, facilitates adhesion to the substrate, and allows the material to be shaped. It achieves a full cure in 24 hours and is resistant to water, chemicals, and temperature extremes.
AB Original contains no solvents or VOC’s, is non-flammable and releases no noxious fumes. It will not shrink or pull away when setting. The unused portion stays fresh for future use when saved in its original package.
Pipe repairs made with AB Original can be overwrapped with a SylWrap Pipe Repair Bandage. SylWrap Bandage provides an impact-resistant, rock-hard layer of protection for a high-pressure repair.
Benefits of AB Original Epoxy Putty Stick
- Easy to use – simply cut off the putty, knead by hand and apply
- Two hour working time allows for complex repairs to be carried out and minimises waste
- Ceramic-filled for super strength and can be worked without cracking or tearing
- Bonds to metals, wood, brick, masonry, concrete and most plastics
AB Original Epoxy Putty Stick pipe repair applications
- Steel pipe repair, iron pipe repair, copper pipe repair, PVC plastic pipe repair, GRP pipe repair, ceramic pipe repair, concrete pipe repair, lead pipe repair, rubber pipe repair
- Underwater repair
- Restoring surface profile for improved pipeline integrity
- Use as a sacrificial layer in chemically aggressive environments
AB Original Epoxy Putty Stick plumbing applications
- Repair breaks and chips on tiles and ceramics
- Levelling toilets, sinks and basins on uneven floors
- Filling and sealing gaps
- Replacing damaged grout
AB Original Epoxy Putty Stick maintenance and repair applications
- Repair damaged concrete and paving slaps
- Filling drill holes in masonry and walls
- Insulating electrical components
AB Original Epoxy Putty Stick industrial applications
- Making prototypes
- Repairing components in the required colour and filling holes
- Sealing cable glands and joints and insulating electrical cables
AB Original Epoxy Putty Stick marine applications
- Underwater repair
- Repairing boats and surf boards
Technical Data
Data | |
Work Time | 90–120 minutes |
Functional Cure | 5–8 hours |
Full Cure | 24 hours |
Max Service Temp | 150°C |
Product Codes
Code | No. of Sticks | Colour |
AB-STICK-WHITE-200g | 1 | White |
AB-STICK-WHITE-1kg | 5 | White |
AB-STICK-WHITE-5kg | 25 | White |
AB-STICK-WHITE-10kg | 50 | White |
AB-STICK-BLACK-200g | 1 | Black |
AB-STICK-BLACK-1kg | 5 | Black |
AB-STICK-BLACK-5kg | 25 | Black |
AB-STICK-BLACK-10kg | 50 | Black |
AB-STICK-GREY-200g | 1 | Grey |
AB-STICK-GREY-1kg | 5 | Grey |
AB-STICK-GREY-5kg | 25 | Grey |
AB-STICK-GREY-10kg | 50 | Grey |
TDS Downloads
Sylmasta AB Original Epoxy Putty Stick Case Studies
Case Study: Rotted Wood Beam Repair in Renovation of Welsh Home
Case Study: Pipe Joints Sealed in Cast Iron Rainwater Stack Repair at London Office Block
Case Study: Underground 600mm Concrete Water Main Pipe Break Repair in Canada
Case Study: Seawater Storage Tank Floor Repair at Gas Processing Plant in Saudi Arabia
Case Study: Environment Agency Repair Crack in Underwater Wall Between River & Trout Farm
Case Study: Fence Spurs Suffering from Concrete Cancer Filler Repair Using Epoxy Putty
Case Study: Repair of Leaking 350mm Effluent Pipe Running out to Sea Underneath Salt Marshes
Case Study: Reinforcement of Heavily Corroded Steel Pipe to Avoid Future Leak Repair
Case Study: Oil Refinery Repair of a Leaking Underground GRP Seawater Return Pipe
Case Study: Protection of Wooden Entrance Gates at an Estate in Scotland Against Rotting
Case Study: Filler Repair of 50mm Crack Between Toilet Waste Pipe & Bathroom Floor
Case Study: Using Epoxy Putty for Cracked & Damaged Brick Repair & Restoration
Case Study: Desalination Plant Partially Buried 3000mm FRP Discharge Return Pipe Repair
Case Study: Snapped Nozzle on a 1500mm Seawater Cooling Line Repair & Reinforcement
Case Study: Repair & Refurbishment of a 19th Century Pit Wheel at Mordiford Mill
Case Study: Leak Repair & Encapsulation of a Steel & Iron Welded Pipe Joint
Case Study: Chip Filler Repair to a Damaged £500 Designer Bar Stool Made of SMC
Sylmasta AB Original Epoxy Putty Stick Videos
How to use a Sylmasta AB Original Epoxy Putty Stick
Watch how easy it is to use a Sylmasta AB Original Epoxy Putty Stick with the mixed putty applied to a wooden demonstration piece, filling a missing corner and deep holes before being sanded to an ultra smooth finish.
Please use the form to enquire about the price and availability of
Sylmasta AB Original Epoxy Putty Stick
Related Epoxy Putties
Sylmasta AB Rapid 5 Minute Epoxy Putty
AB Rapid combines the ceramic-filled, super-strength properties, two-part format and bulk pack size of AB Original with the fast cure time of Superfast Epoxy Putty. It makes general repairs to all substrates and offers good chemical resistance but not does bond underwater.
Work Time: 5 minutes
Full Cure: 24 hours
Max Service Temp: Up to 150ºC
Superfast Aqua Potable Water Epoxy Putty Stick
Specialist epoxy formulated for very high underwater and wet surface adhesion. It comes in an easy-to-use, pre-formatted 114g stick and has WRAS approval. It has a 5-minute work time and bonds to many different substrates in damp, wet, saltwater and freshwater conditions.
Work Time: 5 minutes
Functional Cure: 1 hour
Max Service Temp: Up to 150ºC
Superfast Titanium Epoxy Putty Stick
Titanium-filled epoxy formulated for high temperature repair and bonding applications, offering resistance to 280ºC. It comes in an easy-to-use, pre-formatted 114g stick, has a 90-minute work time and adheres to most materials operating under extreme heat.
Work Time: 90 minutes
Functional Cure: 8 hours
Max Service Temp: Up to 280ºC