A 900mm steel water main in an underground chamber flooded by water escaping from significant cracks around a flange in Malaysia undergoes an ‘impossible’ repair
Month: October 2021
Case Study: Magic Corner Kitchen Unit Repair Saves a Client Over £200 in Replacement Costs
The high-strength bonding properties of Superfast Steel Epoxy Putty Stick repair a damaged magic corner kitchen unit which would have cost £290 to replace
Case Study: 19th Century Lantern Restoration Using Superfast Steel Epoxy Putty
Superfast Steel Epoxy Putty is used in the restoration of a Victorian candle-lit lantern dated to the 1870s or 1880s, returning the item to full working order
Case Study: Snapped Nozzle on a 1500mm Seawater Cooling Line Repair & Reinforcement
The main supply line in a seawater cooling system undergoes urgent repair and reinforcement after a snapped nozzle began discharging water 5 metres into the air
Case Study: Live Leak Pinhole Repair on 150mm Elbow at Pumping House in Malaysia
An elbow joint leaking from a pinhole in a Malaysia pumping house undergoes a live leak repair under 6 bar pressure which enabled systems to remain operational
Case Study: Repair of a Leaking 200mm Fuel Oil Line Pressure Resistant to 44 bar in Libya
A corroded underground 200mm fuel oil in Libya leaking through a small crack is sealed with a repair pressure resistant to 44 bar and capable of withstanding temperatures of up to 70°C
Case Study: Repair of a Cracked Copper Pipe in a Camper Van Boiler System
A camper van owner repairs a very difficult-to-access copper pipe in the van’s boiler system which was leaking water through a large crack whenever the boiler was turned on
Case Study: Bahrain International Airport Repair of Leaking Step Joint on 100mm UPVC Pipe
Systems are kept operational at Bahrain International Airport thanks to an under pressure repair on a 100mm UPVC pipe leaking from a step joint
Case Study: Creating an Abrasion Resistant Surface for Pug Mill Extruder Barrels
Ceramic Brushable Blue is used to coat pug mill putty extruder barrels, creating an abrasion resistant surface to increase extrusion efficiency and protect against future wear
Case Study: Repair & Refurbishment of a 19th Century Pit Wheel at Mordiford Mill
Sylmasta AB provides a waterproof, corrosion resistant material to protect a 19th century pit wheel from water ingress and help bond two steel hoops to its castings for reinforcement